How Much Does It Cost To Build A Wheelchair Ramp
Written by webtechs

How Much Does It Cost To Build A Wheelchair Ramp?

How Much Does It Cost To Build A Wheelchair Ramp

On average, a professionally built wheelchair ramp costs $2,061, with prices ranging between $1,012-$3,160, according to HomeAdvisor. You can expect to pay anywhere from $100-$250 per linear foot, depending on labor costs and materials chosen for the project. Standard ramps are typically 30 feet long, 30 inches high and 30 inches wide.

Average Cost To Build A Wheelchair Ramp

Including labor, materials and overall difficulty of the project, the average total cost to a build a wheelchair ramp is between $1,000-$3,000. In larger cities the total cost may double for this build, with materials costing up to 20% more. Expensive materials combined with larger heights needed for the ramp could put the project cost between $4,000-$6,000.

While most costs come at a standard rate, labor prices will obviously vary by contractor. Wooden wheelchair ramps can be constructed by carpenters for a typical rate of $70 per hour. A concrete unit will require the efforts of a mason or handyman, usually costing an average of $75 per hour. Make sure any contractor you hire is insured, experienced and familiar with ADA regulations.

Wheelchair Ramp Material Prices Per Linear Foot

  • Wood: $100-$250
  • Concrete: $200-$250
  • Aluminum: $150
  • Prefabricated Aluminum: $100
  • Steel/Metal: $200-$250

Wheelchair Ramp Cost Factors

Here are a few factors that could cause the price to either increase or decrease:

  • Calculating slope
  • Weight
  • Landings
  • Handrail installation
  • Grit Strips
  • Permits

Calculating Slope

Slope is the biggest safety concern when installing a wheelchair ramp. A ramp that is particularly steep can result in individuals tipping and falling backwards. Keep in mind the possibility of inclement weather, such as rain and snow. The lower the slope, the safer the ramp tends to be for anyone using it.

Weight

Ramps can be designed for both manual and electric wheelchairs. Be sure to talk to the contractor about how you plan to use your ramp. Improper units are commonly the result of inaccurate weight specifications. Opt for a stronger material to support more weight, which will result in a longer construction time.

Landings

Flat and level landings are necessary on both sides of the wheelchair ramp. These landings will allow for safe stopping and doorway openings. If there is no landing at the bottom, it will be nearly impossible for the individual to open the door. Landings need to be, at least, as wide as the ramp itself. This often measures to a minimum of 60 inches. A 60-inch length by 60-inch width should create an effective landing platform.

Handrail Installation

Ramps that exceed certain regulations will require the installation of a handrail, which will increase the cost of the project. Anyone constructing this as a DIY project can expect to pay around $300 for metal rails.

Grit Strips

Ramps built out of wood or metal can become slippery when wet. Consider purchasing grit strips for your wheelchair ramp. For just $15-$30 per standard 2 x 60 roll, grit strips are affordable and effective. Grit tape can quickly bond permanently to almost any surface.

Permits

The last costs to account for are attaining any necessary permits for the ramp build. Check with your local building office to see if any permits are required prior to installation. If needed, permits typically cost between $30-$120.

Mobility Center In Mesa, Arizona

Mobility Center has been proudly serving the entire Phoenix, Arizona area since 1975 with the finest in mobility aids, scooters, wheel chairs, lifts and support equipment. Visit our convenient location to see the products and receive the individual attention that you deserve. Our service area includes Mesa, Apache Junction, Tempe, Chandler, Scottsdale, Phoenix, Glendale, Surprise, and Sun City.

More Articles About Senior Living